RaspAIS Stations
This setup includes a Raspberry Pi MiniPC and a Weatherdock RaspAIS Receiver built into a single plastic or metal enclosure.
After each step, remember to check your My Vesseltracker status to see if your station has come back online.
Step 1: Check Cable Connections
Ensure that the power, Ethernet and antenna cables are properly and tightly connected on each end.
Check My Vesseltracker status now →
Step 2: Restart Device
Disconnect the power cable from the device, wait 10 seconds, and reconnect the power cable. Shutting down the device and powering it back on will return it to its normal state.
Check My Vesseltracker status now →
Step 3: Check Raspberry Pi LEDs
If your antenna still hasn't come back online, ensure that its LED lights are flashing correctly.
raspAIS Normal LED Sequence:
raspAIS Normal Ethernet LED Sequence:
Check My Vesseltracker status now →
Are the LED Lights flashing normally?
| Probable issue | |
|---|---|
| Yes | There may be a problem with your Internet connection to the Vesseltracker.com server. You can continue troubleshooting using Step 2 of the Internet Connection Section of this guide. |
| No | Your equipment may be broken. Please email a video clip of the LED lights (ideally 10-15 seconds long) to ais@vesseltracker.com so we can confirm and coordinate replacement equipment. Email us now → |